Welcome to our website.

Featured

  • Cheap price Electric Moving Contact - Electrical Contact Tips – ZHJ

    Cheap price Electric Moving Contact - Electrical Contact Tips – ZHJ

    Product features: Silver cadmium oxide electrical contact material is widely used, the low melting point of contact in contacts of sublimation can make the cooling surface of contact, and at the same time quenching effect, prevent contact burning. AgSnO2, AgSnO2In2O3 contact has the advantages of high hardness, high resistance to fusion welding and resistance to burning etc.. The material is the best environmental protection material to replace AgCdO. Application: Contactors, circuit br...
  • High Quality for Silver Clad Copper Wire - Silver Alloy Wires – ZHJ

    High Quality for Silver Clad Copper Wire - Silver Alloy Wires – ZHJ

    Application: Contactors, circuit breakers, thermostats, intelligent switches, etc The Material: Ag/FAg,AgNi,AgCdO,AgZnO,AgSnO2,AgSnO2In2O3 Microstructure General Description Silver and fine grain silver (FAg) possess very high electrical and thermal conductivity, low and stable contact resistance, and good workability. For silver resistance to arc erosion and contact welding are limited, mechanical strength is low, Due to the small quantity of nickel in the fine grain silver, res...
  • High Quality Powder Metal Contacts - POWDER METAL CONTACTS – ZHJ

    High Quality Powder Metal Contacts - POWDER METAL CONTACTS – ZHJ

    Application: Contactors, circuit breakers, thermostats, intelligent switches, etc The Material: AgC,AgW,AgWC,AgWCC,AgNiC,CuW Microstructure General Description AgC contact materials show a very high resistance against contact welding and low contact resistance. Resistance against welding increases with increasing graphite content. AgC materials have self-lubricating behavior when used as sliding contacts. Application Scope Mainly used in protective switches such as MCBs, MCCBs, r...
  • 2020 China New Design Electrical Contacts Material - Welding Assembly – ZHJ

    2020 China New Design Electrical Contacts Material - Welding Assembly – ZHJ

    Welding Assembly We import B-5000 welding machine from Bihler in Germany, we can weld 200-300pcs per minutes. Two basic processes are used in contact welding: individual contact pieces are welded onto solid or pre-stamped carrier strips or the stamped contact parts are manufactured from semi-finished strip with already pre-attached contact material. During welding of contact pieces the contact material is attached from either profiles (tapes), wire segments or in tip form. The maximum contact...
  • Factory Free sample Rivets For Contact Points - Tri-metal Contact rivet – ZHJ

    Factory Free sample Rivets For Contact Points - Tri-metal Contact rivet – ZHJ

    Product Features 1.Tri-metal rivet can replace solid rivet.It widely used as moving contacts during two sides of contact,to a great extent reduce the material cost. 2.mprove the contact  rivet riveting performance. 3.Apply continuous automation production. Main Application Automobile electric appliances,household appliances,replays,contactor, Thermostat,all kinds of switch,aviation appliances,timer and electronic appliances. Process flow Rivet Making Annealing Finishing Inspection Drawin...
  • 2020 Good Quality Contact Tip Mag Welding - Electrical Contact Tips – ZHJ

    2020 Good Quality Contact Tip Mag Welding - Electrical Contact Tips – ZHJ

    Product features: Silver cadmium oxide electrical contact material is widely used, the low melting point of contact in contacts of sublimation can make the cooling surface of contact, and at the same time quenching effect, prevent contact burning. AgSnO2, AgSnO2In2O3 contact has the advantages of high hardness, high resistance to fusion welding and resistance to burning etc.. The material is the best environmental protection material to replace AgCdO. Application: Contactors, circuit br...
  • High Quality Brass Rivet - Solid Contact rivet – ZHJ

    High Quality Brass Rivet - Solid Contact rivet – ZHJ

    Solid rivets present a larger challenge when de-riveting.  The manufactured head must be ground or milled off prior to pushing the rivet back through the hole.  When removing solid rivets, the material of the component surrounding the hole must be considered.  If the material is softer than the rivet, there is a chance it will be damaged.  If the hardness is equal to or harder than the rivet the risk of damage is lower, as it will maintain its shape while the softer rivet is pushed back throu...
  • High Quality Powder Metal Contacts - POWDER METAL CONTACTS – ZHJ

    High Quality Powder Metal Contacts - POWDER METAL CONTACTS – ZHJ

    Application: Contactors, circuit breakers, thermostats, intelligent switches, etc The Material: AgC,AgW,AgWC,AgWCC,AgNiC,CuW Microstructure General Description AgC contact materials show a very high resistance against contact welding and low contact resistance. Resistance against welding increases with increasing graphite content. AgC materials have self-lubricating behavior when used as sliding contacts. Application Scope Mainly used in protective switches such as MCBs, MCCBs, r...
  • Factory source Silver Alloy Wire 0.5 Mm - Silver Alloy Wires – ZHJ

    Factory source Silver Alloy Wire 0.5 Mm - Silver Alloy Wires – ZHJ

    Application: Contactors, circuit breakers, thermostats, intelligent switches, etc The Material: Ag/FAg,AgNi,AgCdO,AgZnO,AgSnO2,AgSnO2In2O3 Microstructure General Description Silver and fine grain silver (FAg) possess very high electrical and thermal conductivity, low and stable contact resistance, and good workability. For silver resistance to arc erosion and contact welding are limited, mechanical strength is low, Due to the small quantity of nickel in the fine grain silver, res...
  • High Quality Electrical Contact Assemblies - Welding Assembly – ZHJ

    High Quality Electrical Contact Assemblies - Welding Assembly – ZHJ

    Welding Assembly We import B-5000 welding machine from Bihler in Germany, we can weld 200-300pcs per minutes. Two basic processes are used in contact welding: individual contact pieces are welded onto solid or pre-stamped carrier strips or the stamped contact parts are manufactured from semi-finished strip with already pre-attached contact material. During welding of contact pieces the contact material is attached from either profiles (tapes), wire segments or in tip form. The maximum contact...
  • Low price for Solid Copper Rivets - Tri-metal Contact rivet – ZHJ

    Low price for Solid Copper Rivets - Tri-metal Contact rivet – ZHJ

    Product Features 1.Tri-metal rivet can replace solid rivet.It widely used as moving contacts during two sides of contact,to a great extent reduce the material cost. 2.mprove the contact  rivet riveting performance. 3.Apply continuous automation production. Main Application Automobile electric appliances,household appliances,replays,contactor, Thermostat,all kinds of switch,aviation appliances,timer and electronic appliances. Process flow Rivet Making Annealing Finishing Inspection Drawin...
  • Factory Free sample Rivets For Contact Points - Solid Contact rivet – ZHJ

    Factory Free sample Rivets For Contact Points - Solid Contact rivet – ZHJ

    Solid rivets present a larger challenge when de-riveting.  The manufactured head must be ground or milled off prior to pushing the rivet back through the hole.  When removing solid rivets, the material of the component surrounding the hole must be considered.  If the material is softer than the rivet, there is a chance it will be damaged.  If the hardness is equal to or harder than the rivet the risk of damage is lower, as it will maintain its shape while the softer rivet is pushed back throu...