Hot sale Silver Bimetal Contact Rivets – Solid Contact rivet – ZHJ
China Hot sale Silver Bimetal Contact Rivets - Solid Contact rivet - ZHJ Manufacturer and Supplier | ZHJ Detail:
Solid rivets present a larger challenge when de-riveting. The manufactured head must be ground or milled off prior to pushing the rivet back through the hole. When removing solid rivets, the material of the component surrounding the hole must be considered. If the material is softer than the rivet, there is a chance it will be damaged. If the hardness is equal to or harder than the rivet the risk of damage is lower, as it will maintain its shape while the softer rivet is pushed back through. How the rivet was initially formed also plays a role in the de-riveting process. The larger the shank swell created in the forming process, the higher the risk of damage to the surrounding component.
Process flow
Rivet Making
Annealing
Finishing
Inspection
Drawing
Packing
Measure
|
Item |
Head diameter D（mm） |
Head thickness T(mm) |
Foot diameter d(mm) |
Foot length L（mm） |
Sphere radius R（mm） |
| Basic dimension |
1.2~12 |
0.15~3.00 |
0.75~6.00 |
0.45~8.56 |
1.2~40 |
| tolerance |
±0.05 |
－0.02∽ |
－0.02∽ |
±0.05 |
±2 |
Product detail pictures:
Related Product Guide:
We normally think and practice corresponding on the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and also the living for China Hot sale Silver Bimetal Contact Rivets - Solid Contact rivet - ZHJ Manufacturer and Supplier | ZHJ , The product will supply to all over the world, such as: Israel , Netherlands , Bahamas , Many products fully conform to the most rigorous of international guidelines and with our first-rate delivery service you will have them delivered at any time and in any place. And because Kayo deals in the entire spectrum of protective equipment, our customers don't need to waste time shopping around.
By Dinah
from Sao Paulo
- 2018.12.10 19:03
We have been looking for a professional and responsible supplier, and now we find it.
By Andrea
from Bangladesh
- 2017.10.25 15:53
