Hot New Products Electrical Contact Points – Welding Assembly – ZHJ
China Hot New Products Electrical Contact Points - Welding Assembly - ZHJ Manufacturer and Supplier | ZHJ Detail:
Welding Assembly
We import B-5000 welding machine from Bihler in Germany, we can weld 200-300pcs per minutes.
Two basic processes are used in contact welding: individual contact pieces are welded onto solid or pre-stamped carrier strips or the stamped contact parts are manufactured from semi-finished strip with already pre-attached contact material. During welding of contact pieces the contact material is attached from either profiles (tapes), wire segments or in tip form. The maximum contact area size for high rate welding while maintaining close manufacturing tolerances is 5 x 5 mm².
Depending on the application contact materials used are based on gold, palladium or silver. To utilize the most reliable and economical manufacturing process the contact materials usually have an easily weldable backing.
|
Production process |
Strip uncoiling-strip leveling-Pre punching-Coin and weld-Final punching |
|
Rate of production |
300-450pcs/min |
|
Strip width |
≤60mm |
|
Strip thickness |
0.1-1.0mm |
|
Ag、AgNi、AgCu、AgFe，etc. |
|
|
Contact wire diameter range |
Φ0.4 – Φ2.5 mm |
|
Contact diameter |
Φ1-Φ4.5mm |
|
Contact height |
0.2-2.0mm |
|
Bonding strength |
l 80-800N l Longitudinal welding line≥Contact wire diameter） l Transverse welding line≥1/2Contact wire diameter） |
Stamped parts with semi-finished contact strips
Stamped parts from semi-finished contact strip are economically produced from continuous strip. Contact material produced in our mill facilities are based on gold, palladium and silver. Copper and copper alloys are used as base carrier materials.
Clad Stampings
Many contact applications require thicker precious metal layers. These cannot be applied to the substrates economically by electroplating processes. In addition contact materials with very specific physical and mechanical properties are often required. These materials from gold-palladium alloys or based on silver are made by either alloy melting or powder metallurgy. The combination of contact and base material is achieved by cladding processes such as cold roll-cladding or hot roll-bonding.
Stamped Parts from Toplay Profiles
DODUCO manufactures contact bimetals in strip form by brazing of flator shaped strips to carrier materials followed by profile rolling. These are the basis for customer specified contact parts with raised precious metal segments for highly demanding applications.
Stamped Parts from seam-welded strips
The main advantage of seam-welded strip material for the production of contact stampings is the limited area of the weld zone. This results in softening of spring hard base materials only in the immediate weld effected area. The contact layers consist mainly of solid contact materials or composite contact profiles or weld.
Application
Product detail pictures:
Related Product Guide:
"Quality first, Honesty as base, Sincere service and mutual profit" is our idea, in order to develop continuously and pursue the excellence for China Hot New Products Electrical Contact Points - Welding Assembly - ZHJ Manufacturer and Supplier | ZHJ , The product will supply to all over the world, such as: azerbaijan , Brasilia , Slovakia , Ought to any of these products be of curiosity to you, remember to allow us to know. We are going to be satisfied to give you a quotation on receipt of one's in depth specs. We've our private experienced R&D enginners to meet any of one's requriements, We appear forward to receiving your enquires soon'and hope to have the opportunity to work together with you in the future. Welcome to check out our company.
By Amelia
from Boston
- 2017.12.31 14:53
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Coral
from Lisbon
- 2018.06.28 19:27
