High Quality for Single Phase Electric Contactor – Electrical Contact Tips – ZHJ
China High Quality for Single Phase Electric Contactor - Electrical Contact Tips - ZHJ Manufacturer and Supplier | ZHJ Detail:
Product features：
Silver cadmium oxide electrical contact material is widely used, the low melting point of contact in contacts of sublimation can make the cooling surface of contact, and at the same time quenching effect, prevent contact burning.
AgSnO2, AgSnO2In2O3 contact has the advantages of high hardness, high resistance to fusion welding and resistance to burning etc..
The material is the best environmental protection material to replace AgCdO.
| Application: |
| Contactors, circuit breakers, thermostats, intelligent switches, etc |
| The Material: |
| AgZnO , AgSnO2 , AgCu , AgCuO , AgCdO , AgNi , AgSnO2In2O3 , AgSnO2/Cu , AgCdO/Cu etc. |
| matriral | Wt% | G/cm3 | μΩ.cm | Mpa | % | HV:KGF/MM2 |
| AgCdO10 | 90 | ≥10.1 | ≤2.10 | ≥260 | ≥15 | ≥50 |
| AgCdO10 | 88 | ≥10.0 | ≤2.2 | ≥260 | ≥12 | ≥60 |
| AgCdO10 | 85 | ≥9.85 | ≤2.3 | ≥260 | ≥10 | ≥65 |
| AgCdO10 | 83 | ≥9.8 | ≤2.4 | ≥260 | ≥8 | ≥65 |
| AgSnO2（8） | 92 | ≥9.9 | ≤2.3 | ≥250 | ≥17 | ≥70 |
| AgSnO2（10） | 90 | ≥9.8 | ≤2.3 | ≥250 | ≥15 | ≥75 |
| AgSnO2（12） | 88 | ≥9.7 | ≤2.4 | ≥260 | ≥12 | ≥80 |
| AgSnO2（5）In2O3（3） | 92 | ≥9.9 | ≤2.3 | ≥250 | ≥17 | ≥75 |
| AgSnO2（5）In2O3（4） | 90 | ≥9.8 | ≤2.4 | ≥250 | ≥17 | ≥80 |
| AgSnO2（5）In2O3（4） | 88 | ≥9.7 | ≤2.5 | ≥260 | ≥12 | ≥85 |
Main Processes:
smelting
extrusion
hot rolling
cold rolling
Inspecting packing
surface treatment
Internal oxidized
stamping
Main Application
Product detail pictures:
Related Product Guide:
In order to give you convenience and enlarge our business, we also have inspectors in QC Team and assure you our best service and product for China High Quality for Single Phase Electric Contactor - Electrical Contact Tips - ZHJ Manufacturer and Supplier | ZHJ , The product will supply to all over the world, such as: Luxembourg , Colombia , Malaysia , In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Emily
from Bangalore
- 2017.06.29 18:55
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Genevieve
from Johannesburg
- 2017.06.29 18:55
